Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: INTEL Product ID: ALDER APIC at: 0xFEC08000 Processor #0 Unknown CPU [6:1] APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. Bootup CPU Processor #4 Unknown CPU [6:1] APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. Processor #1 Unknown CPU [6:1] APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. Processor #2 Unknown CPU [6:1] APIC version 17 Floating point unit present. Machine Exception supported. 64 bit compare & exchange supported. Internal APIC present. Bus #0 is PCI Bus #1 is PCI Bus #18 is EISA I/O APIC #14 Version 17 at 0xFEC00000. Processors: 4 Console: 16 point font, 400 scans Console: colour VGA+ 80x25, 1 virtual console (max 63) pcibios_init : BIOS32 Service Directory structure at 0x000fccc0 pcibios_init : BIOS32 Service Directory entry at 0xfccd0 pcibios_init : PCI BIOS revision 2.10 entry at 0xfccf1 Probing PCI hardware. Warning : Unknown PCI device (8086:8). Please read include/linux/pci.h Warning : Unknown PCI device (8086:84c5). Please read include/linux/pci.h Calibrating delay loop.. ok - 198.66 BogoMIPS Memory: 63380k/65536k available (680k kernel code, 384k reserved, 1092k data) This processor honours the WP bit even when in supervisor mode. Good. Swansea University Computer Society NET3.033 for Linux 1.3.50 NET3: Unix domain sockets 0.10 BETA for Linux NET3.033. Swansea University Computer Society TCP/IP for NET3.033 IP Protocols: ICMP, UDP, TCP Checking 386/387 coupling... Ok, fpu using exception 16 error reporting. Checking 'hlt' instruction... Ok. Linux version 1.3.59 (root@pdxpc297) (gcc version 2.7.0) #32 Fri Feb 16 17:09:27 PST 1996 CPU map: 17 Booting processor 1 stack 00002000: Asserting INIT. Deasserting INIT. Sending first STARTUP. Calibrating delay loop.. ok - 198.66 BogoMIPS Sending second STARTUP. Booting processor 2 stack 00003000: Asserting INIT. Deasserting INIT. Sending first STARTUP. Calibrating delay loop.. ok - 198.66 BogoMIPS Sending second STARTUP. Booting processor 4 stack 00004000: Asserting INIT. Deasserting INIT. Sending first STARTUP. Calibrating delay loop.. ok - 198.66 BogoMIPS Sending second STARTUP. Total of 4 processors activated (794.62 BogoMIPS). Serial driver version 4.11 with no serial options enabled tty00 at 0x03f8 (irq = 4) is a 16550A tty01 at 0x02f8 (irq = 3) is a 16550A PS/2 auxiliary pointing device detected -- driver installed. Floppy drive(s): fd0 is 1.44M Started kswapd v 1.4.2.2 FDC 0 init: SAVE: unexpected return of 16 bytes. aic7xxx: AHA-2940 Rev B. aic7xxx: devconfig(0x5) devstatus(0x0). aic7xxx: Reading SEEPROM...done. aic7xxx: Extended translation enabled. aic7xxx: Enabling wide channel of AHA-2940-Wide. AHA-2940-WIDE (PCI-bus): irq 11 bus release time 40 bclks data fifo threshold 100 SCSI CHANNEL A: scsi id 7 scsi selection timeout 256 ms scsi bus reset at power-on enabled scsi bus parity enabled scsi bus termination (low byte) enabled scsi bus termination (high byte) enabled aic7xxx: Downloading sequencer code...done. aic7xxx: Resetting the SCSI bus...done. aic7xxx: AIC-7880 Ultra Rev B. aic7xxx: devconfig(0x15) devstatus(0x80). aic7xxx: Reading SEEPROM...aic7xxx: SEEPROM checksum error, ignoring SEEPROM settings. aic7xxx: Unable to read SEEPROM. aic7xxx: Extended translation enabled. aic7xxx: Enabling wide channel of AIC-7880 Ultra-Wide. AIC-7880 Ultra-WIDE (PCI-bus): irq 10 bus release time 2 bclks data fifo threshold 100 SCSI CHANNEL A: scsi id 7 scsi selection timeout 256 ms scsi bus reset at power-on enabled aic7xxx: Downloading sequencer code...done. aic7xxx: Resetting the SCSI bus...done. scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 2.15/2.2/2.3 scsi1 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 2.15/2.2/2.3 scsi : 2 hosts. aic7xxx: Scanning channel A for devices. aic7xxx: Received MSG_WDTR, Target 0, channel A needwdtr(0xffff). aic7xxx: Target 0, channel A, using 16 bit transfers. aic7xxx: Target 0, channel A, now synchronous at 10.0MB/s, offset(0x8). Vendor: SEAGATE Model: ST32550W Rev: 0009 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 aic7xxx: Scanning channel A for devices. scsi : detected 1 SCSI disk total. SCSI Hardware sector size is 512 bytes on device sda Partition check: sda: sda1 sda2 VFS: Mounted root (ext2 filesystem) readonly. Beginning scheduling on CPU#4 Adding Swap: 72288k swap-space